| User | Post |
Kyoufu Kawa
Posts: 1411/2481 |
Very possible. But the old "from" connection must leave the screen to be replaced with the new "to" conn. |
Gywall
Posts: 346/356 |
Probably explains my crap marks for physics in science. *is stupid at physics while smart at biology/chemistry  *
I wonder if it's possible to make a map that you enter one way, and exit a different way.
probably requires some working out, but it'd be funny to see. |
Kyoufu Kawa
Posts: 1409/2481 |
Actually, Gywall, it's a Law of Physics.
Map A is vertically connected to Map B with a road crossing the border.
Map A's road piece starts at the horizontal position of 5, Map B's road piece starts at 10.
B is more to the right than A, so the offset is 10 - 5 = 5.
Since A is to the left, you just take the other value and negate it into -5.
RoadPos = tile position of one side of a road or other boundary-crossing landmark
Difference = RoadPos(B) - RoadPos(A)
Connection offset from A to B = Difference
Connection offset from B to A = -Difference
Since I'm not much of a math wiz, I could have those last two statements mixed up. |
Gywall
Posts: 345/356 |
i usualy find the offsets are
X/Y (map 1): n
X/Y (map 2): -n
n being a variable number. So if n was 5:
X/Y (map 1): 5
X/Y (map 2): -5
Usualy works, I think. Not hacked in a while. |
Kyoufu Kawa
Posts: 1403/2481 |
NooNoo: No one word posts. It's a rule.
Tony: If you mean to say that you're already doing it yourself, you should be ashamed to have said it at all. If NooNoo wants to remake Johto, that's his problem. |
NooNooKKM
Posts: 111/118 |
Originally posted by Keitaro
Re-making Johto? Heh... Don't bother  trust me on this.
oh? And what exactly is that supposed to mean? (edited for quantity) |
Keitaro
Posts: 1184/1342 |
Re-making Johto? Heh... Don't bother trust me on this. |
imakuni
Posts: 3/4 |
I've never really had this problem before, any of the times ive fooled around with elitemap. It looks like a glitch to me.
By the way, thats Violet in Johto, isn't it? |
NooNooKKM
Posts: 108/118 |
the trees are part of the border, so thats no good. |
kalkris
Posts: 1/1 |
By George, I think I've got it!
You see, since those are two separate maps, you just have to use Elitemap to change the trees to that path, and voila! That's the easy way out!
~Kalkris, the new member, and his 1st post ever! |
NooNooKKM
Posts: 102/118 |
That I did. Matter of fact, the map connections were working fine prior to changing one of the map's layout. I've tried changing offsets in EM 3.6, but no working. The same problem is also happening with the map that was connected on the other side:
 
same happens on both sides of the map i started on.
It might be a glitch if you ask me. Something you might have to check out. interdpth said he had the same problem once. |
Kyoufu Kawa
Posts: 1179/2481 |
Connections go two ways. You must define a conn from B back to A ass swell. |
NooNooKKM
Posts: 101/118 |
Alrigh, well I set two maps to be able to able to connect (using Elitemap), and was able to have it so that it was lined up correctly. Now here's my dillemma (lets call it Map A, B, and C)
I start at map A, which is linked to B, and the edge of B shows up at the edge of A. I walk onto B just fine. Now I walk south towards C, and back up into B. I go to the place where A is supposed to line up with B, but all there is is trees. |
