| User | Post |
HyperLamer
Posts: 3141/8210 |
Just wanted to point out that your English is actually pretty good. 
Anyway, go to Level -> Modify Secondary Entrances. Find one with no destination or that you don't plan to use, and set the options. (Tip: Next time you do that it'll stay at whatever entrance you edited last, very useful. Of course it's only until you close LM.) Then go to Level -> Add/Modify/Delete Screen Exits, set the screen number, put in the seconary entrance number and check the Secondary Exit box. |
Otto
Posts: 4/6 |
OK, Thanks a lot  how do I add a secondary entrance? |
UnsurpassedDarkness
Posts: 417/746 |
Originally posted by Otto
The pipe entrance is on screen 03, but there are 2 pipes on that screen... what can I do now?
Move one of the pipes to a new screen. You can |
Otto
Posts: 3/6 |
Wow, it's easy  Thanks a lot...
And if I want the pipe destination in the same level that the pipe entrance is placed on?
Sorry for the REALLY BAD english
Otto
EDIT: The pipe entrance is on screen 03, but there are 2 pipes on that screen... what can I do now? |
Karadur
Posts: 719/1192 |
I'll put it in steps so it's easy to understand (hopefully):
1) Place a pipe on the screen. This can be done through the 'Add Objects' window. Make sure the pipe you select is one with '...with exit enabled.'
2) Find the screen the pipe is on. To do that, click the transparent (light blue) door button on the toolbar at the top of the screen.
3) Open the 'Add/Modify/Delete Screen Exits' box, by clicking the door button to the right of the one with the berry on it.
4) In the drop down list, select the screen number you placed the pipe on, that you found in step 2.
5) Finally, in the bottom box, type the level number you want the pipe to exit to.
Hopefully that's easy enough to understand  |
Otto
Posts: 2/6 |
Hello
I'm confused about the pipes... how do I make a pipe? How do I make its destination?
Thanks, sorry for the bad english
Otto
Edit: Forgot to tell that I'm using Lunar Magic 1.62
|
labmaster
